Pullrequest for Luckfox Pico Pi (#246)
* sysdrv/source/kernel/arch/arm/boot/dts : Add Luckfox Pico Pi device tree files Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * sysdrv/source/kernel/arch/arm/configs : Add Add kernel configuration file support for SIM7600G Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * sysdrv/source/kernel/drivers/usb/serial : Add USB serial driver support for SIM7600G Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-config/usr/bin/luckfox-config : Add support for Luckfox Pico Pi and comments Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/cfg/BoardConfig_IPC : Add BoardConfig files and post script for Luckfox Pico Pi Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/build.sh : Add the lunch menu item of Luckfox Pico Pi Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/cfg/BoardConfig_IPC/overlay : Add SIM7600G overlay files Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * sysdrv/source/kernel/drivers/media/i2c/sc3336.c : Set the SC3336 to use the 30fps mode by default Signed-off-by: luckfox-eng29 <eng29@luckfox.com> --------- Signed-off-by: luckfox-eng29 <eng29@luckfox.com>
This commit is contained in:
@@ -0,0 +1,161 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rv1106.dtsi"
|
||||
#include "rv1106-luckfox-pico-pi-ipc.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/display/media-bus-format.h>
|
||||
|
||||
/ {
|
||||
model = "Luckfox Pico Pi W";
|
||||
compatible = "rockchip,rv1103g-38x38-ipc-v10", "rockchip,rv1106g3";
|
||||
|
||||
restart-poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wireless_bluetooth: wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1m0_rtsn>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,wake_gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
/**********CRU**********/
|
||||
//&cru {
|
||||
// assigned-clocks =
|
||||
// <&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
||||
// <&cru ARMCLK>,
|
||||
// <&cru ACLK_PERI_ROOT>, <&cru HCLK_PERI_ROOT>,
|
||||
// <&cru PCLK_PERI_ROOT>, <&cru ACLK_BUS_ROOT>,
|
||||
// <&cru PCLK_TOP_ROOT>, <&cru PCLK_PMU_ROOT>,
|
||||
// <&cru HCLK_PMU_ROOT>, <&cru CLK_500M_SRC>;
|
||||
// assigned-clock-rates =
|
||||
// <1188000000>, <700000000>,
|
||||
// <1104000000>,
|
||||
// <400000000>, <200000000>,
|
||||
// <100000000>, <300000000>,
|
||||
// <100000000>, <100000000>,
|
||||
// <200000000>, <700000000>;
|
||||
//};
|
||||
|
||||
/**********NPU**********/
|
||||
//&npu {
|
||||
// assigned-clock-rates = <700000000>;
|
||||
//};
|
||||
|
||||
/**********EMMC**********/
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
// mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
memory-region-ecsd = <&mmc_ecsd>;
|
||||
post-power-on-delay-ms = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fiq_debugger {
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********SDIO-WIFI**********/
|
||||
&sdmmc {
|
||||
max-frequency = <50000000>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
// no-sd;
|
||||
// no-mmc;
|
||||
supports-sdio;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl{
|
||||
sdmmc0{
|
||||
sdmmc0_det: sdmmc0-det {
|
||||
rockchip,pins =
|
||||
/* sdmmc0_det */
|
||||
<3 RK_PA1 1 &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/**********SD-CARD*********/
|
||||
&sdio {
|
||||
max-frequency = <50000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1m0_cmd &sdmmc1m0_clk &sdmmc1m0_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********ETH**********/
|
||||
&gmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********USB**********/
|
||||
&usbdrd_dwc3 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
//dr_mode = "host";
|
||||
};
|
||||
|
||||
/**********RTC**********/
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********BT**********/
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/**********SPI**********/
|
||||
&spi0 {
|
||||
status = "disabled";
|
||||
spidev@0 {
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user