gaoro-xiao/LuckFox-RV1103-1106
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fix(luckfox-config):Resolving conflicts between RGB and other pin multiplexing

Browse Source 
feat(luckfox-config):Support for touch screens and FBTFT
feat(luckfox-config):Support for Ubuntu system
feat(ubuntu):Support using local root filesystem for submodule updates
feat(ubuntu):Support for WiFi on Luckfox Pico Ultra W using the Ubuntu system
perf(ubuntu):Improve the initial boot speed of RV1103 using the Ubuntu system
perf(kernel_dts):Improve EMMC read/write speed

Signed-off-by: luckfox-eng29 <eng29@luckfox.com>
This commit is contained in:
luckfox-eng29
2024-06-28 19:18:35 +08:00
committed by luckfox-eng33
parent 6cf97cc3f9
commit 955ff6aa57
73 changed files with 6130 additions and 2172 deletions
Download Patch File Download Diff File Expand all files Collapse all files
sysdrv/source/kernel/arch/arm/boot/dts/rv1106-luckfox-pico-ultra-ipc.dtsi
+51 -31
View File
@@ -56,34 +56,28 @@
panel: panel {
compatible = "simple-panel";
backlight = <&backlight>;
reset-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
reset-delay-ms = <200>;
status = "okay";
bus-format = <MEDIA_BUS_FMT_RGB666_1X18>;
width-mm = <85>;
height-mm = <85>;
reset {
reset-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>;
reset-delay-ms = <200>;
status = "okay";
};
enable {
enable-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
enable-delay-ms = <20>;
status = "okay";
};
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <0>;
hactive = <0>;
vactive = <0>;
hback-porch = <0>;
hfront-porch = <0>;
vback-porch = <0>;
vfront-porch = <0>;
hsync-len = <0>;
vsync-len = <0>;
clock-frequency = <30000000>;
hactive = <720>;
vactive = <720>;
hback-porch = <44>;
hfront-porch = <46>;
vback-porch = <18>;
vfront-porch = <16>;
hsync-len = <2>;
vsync-len = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
@@ -98,7 +92,8 @@
};
};
reserved-memory {
reserved_memory: reserved-memory {
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -107,10 +102,11 @@
reg = <0x0 0x0>;
};
linux,cma {
status = "okay";
compatible = "shared-dma-pool";
inactive;
reusable;
size = <0xA00000>;
size = <0xA00000>; //10M
linux,cma-default;
};
};
@@ -279,8 +275,8 @@
&i2c4 {
status = "okay";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4m2_xfer>;
//pinctrl-names = "default";
//pinctrl-0 = <&i2c4m2_xfer>;
sc3336: sc3336@30 {
compatible = "smartsens,sc3336";
@@ -465,13 +461,27 @@
};
&route_rgb {
status = "okay";
status = "disabled";
};
&vop {
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
GT911:touchscreen {
compatible = "goodix,gt911";
reg = <0x14>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
};
};
/**************************** PINCTRL ******************************/
// SPI
&spi0 {
@@ -492,12 +502,12 @@
&i2c2 {
pinctrl-0 = <&i2c2m0_xfer>;
};
// &i2c3 {
// pinctrl-0 = <&i2c3m0_xfer &i2c3m1_xfer &i2c3m2_xfer>;
// };
// &i2c4 {
// pinctrl-0 = <&i2c4m0_xfer &i2c4m1_xfer &i2c4m2_xfer>;
// };
&i2c3 {
pinctrl-0 = <&i2c3m0_xfer &i2c3m1_xfer &i2c3m2_xfer &tp_rst &tp_irq>;
};
&i2c4 {
pinctrl-0 = <&i2c4m0_xfer &i2c4m1_xfer &i2c4m2_xfer>;
};
// UART
&uart0 {
@@ -507,7 +517,7 @@
pinctrl-0 = <&uart1m1_xfer>;
};
&uart3 {
pinctrl-0 = <&uart3m0_xfer>;
pinctrl-0 = <&uart3m0_xfer &uart3m1_xfer>;
};
&uart4 {
pinctrl-0 = <&uart4m0_xfer>;
@@ -566,4 +576,14 @@
rockchip,pins = <1 RK_PC0 4 &pcfg_pull_none>;
};
};
touchscreen {
tp_rst:tp-rst {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
tp_irq:tp-irq {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};