project:app:rkipc:rkipc:Modify udhcpc for silent operation to suppress irrelevant information from being printed to the terminal

project:build.sh:Add support for multiple folders in post overlay project:cfg:BoardConfig_IPC:Add support for rootfs post overlay sysdrv:Makefile:Replace the script-based copying method with the post overlay approach Signed-off-by: luckfox-eng29 <eng29@luckfox.com>
2024-11-02 18:41:51 +08:00
parent 7a66b04c61
commit 8fdf14595e
66 changed files with 3791 additions and 166 deletions
@@ -0,0 +1,4 @@
+# UNCONFIGURED FSTAB FOR BASE SYSTEM
+/dev/mmcblk0p7  /         ext4    rw      0       0
+/dev/mmcblk0p5  /oem      ext4    defaults        0       0
+/dev/mmcblk0p6  /userdata ext4    defaults        0       0
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+/usr/bin/filesystem_resize.sh
+/usr/bin/wifi_bt_init.sh
+/usr/bin/luckfox_switch_rgb_resolution &
+/etc/init.d/S50usbdevice start
+luckfox-config load
+if [ -n "$(hwclock | grep "invalid")" ]; then
+	date -s 2024-01-01
+	hwclock -w
+fi
@@ -0,0 +1,116 @@
+# Sample udhcpd configuration file (/etc/udhcpd.conf)
+
+# The start and end of the IP lease block
+
+start 		192.168.0.20	#default: 192.168.0.20
+end		192.168.0.254	#default: 192.168.0.254
+
+
+# The interface that udhcpd will use
+
+interface	eth0		#default: eth0
+
+
+# The maximim number of leases (includes addressesd reserved
+# by OFFER's, DECLINE's, and ARP conficts
+
+#max_leases	254		#default: 254
+
+
+# If remaining is true (default), udhcpd will store the time
+# remaining for each lease in the udhcpd leases file. This is
+# for embedded systems that cannot keep time between reboots.
+# If you set remaining to no, the absolute time that the lease
+# expires at will be stored in the dhcpd.leases file.
+
+#remaining	yes		#default: yes
+
+
+# The time period at which udhcpd will write out a dhcpd.leases
+# file. If this is 0, udhcpd will never automatically write a
+# lease file. (specified in seconds)
+
+#auto_time	7200		#default: 7200 (2 hours)
+
+
+# The amount of time that an IP will be reserved (leased) for if a
+# DHCP decline message is received (seconds).
+
+#decline_time	3600		#default: 3600 (1 hour)
+
+
+# The amount of time that an IP will be reserved (leased) for if an
+# ARP conflct occurs. (seconds
+
+#conflict_time	3600		#default: 3600 (1 hour)
+
+
+# How long an offered address is reserved (leased) in seconds
+
+#offer_time	60		#default: 60 (1 minute)
+
+# If a lease to be given is below this value, the full lease time is
+# instead used (seconds).
+
+#min_lease	60		#defult: 60
+
+
+# The location of the leases file
+
+#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases
+
+# The location of the pid file
+#pidfile	/var/run/udhcpd.pid	#default: /var/run/udhcpd.pid
+
+# Everytime udhcpd writes a leases file, the below script will be called.
+# Useful for writing the lease file to flash every few hours.
+
+#notify_file				#default: (no script)
+
+#notify_file	dumpleases 	# <--- usefull for debugging
+
+# The following are bootp specific options, setable by udhcpd.
+
+#siaddr		192.168.0.22		#default: 0.0.0.0
+
+#sname		zorak			#default: (none)
+
+#boot_file	/var/nfs_root		#default: (none)
+
+# The remainer of options are DHCP options and can be specifed with the
+# keyword 'opt' or 'option'. If an option can take multiple items, such
+# as the dns option, they can be listed on the same line, or multiple
+# lines. The only option with a default is 'lease'.
+
+#Examles
+opt	dns	192.168.10.2 192.168.10.10
+option	subnet	255.255.255.0
+opt	router	192.168.10.2
+opt	wins	192.168.10.10
+option	dns	129.219.13.81	# appened to above DNS servers for a total of 3
+option	domain	local
+option	lease	864000		# 10 days of seconds
+
+
+# Currently supported options, for more info, see options.c
+#subnet
+#timezone
+#router
+#timesvr
+#namesvr
+#dns
+#logsvr
+#cookiesvr
+#lprsvr
+#bootsize
+#domain
+#swapsvr
+#rootpath
+#ipttl
+#mtu
+#broadcast
+#wins
+#lease
+#ntpsrv
+#tftp
+#bootfile
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+# Check if the filesystem has been resized previously
+if [ ! -f /etc/.filesystem_resized ]; then
+	# Perform filesystem resize
+	sudo resize2fs /dev/mmcblk0p5
+	sudo resize2fs /dev/mmcblk0p6
+	sudo resize2fs /dev/mmcblk0p7
+
+	# Create a marker file indicating filesystem resize has been done
+	sudo touch /etc/.filesystem_resized
+
+	echo "Filesystem resized successfully."
+fi
+
+if [ ! -f /etc/.filesystem_swap ]; then
+	sudo fallocate -l 1G /swapfile
+	sudo chmod 600 /swapfile
+	sudo mkswap /swapfile >/dev/null
+	sudo swapon /swapfile >/dev/null
+	echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab >/dev/null
+
+	sudo touch /etc/.filesystem_swap
+	echo "Swap successfully."
+fi
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+if [ "$(cat /proc/device-tree/model)" == "Luckfox Pico Ultra W" ]; then
+	systemctl stop wpa_supplicant
+	if [ -d /oem/usr/ko ]; then
+		cd /oem/usr/ko
+		if [ -z "$(ifconfig | grep "wlan0")" ]; then
+			insmod cfg80211.ko
+			insmod libarc4.ko
+			insmod ctr.ko
+			insmod ccm.ko
+			insmod aes_generic.ko
+			insmod aic8800_bsp.ko
+			sleep 0.2
+			insmod aic8800_fdrv.ko
+			sleep 2
+			insmod aic8800_btlpm.ko
+		else
+			# wait systemctl
+			sleep 0.5
+		fi
+	else
+		echo "Missing ko files!"
+	fi
+
+	if [ -d /var/run/wpa_supplicant ]; then
+		rm /var/run/wpa_supplicant/ -rf
+	fi
+
+	if [ -f /etc/wpa_supplicant.conf ] && [ -n "$(ifconfig | grep "wlan0")" ]; then
+		wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf >/dev/null
+		chmod a+x /usr/share/udhcpc/default.script
+	fi
+else
+	echo "This Luckfox Pico model don't support WIFI!"
+fi
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+
+RESOLV_CONF="/etc/resolv.conf"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+case "$1" in
+	deconfig)
+		/sbin/ifconfig $interface 0.0.0.0
+		;;
+
+	renew|bound)
+		/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
+
+		if [ -n "$router" ] ; then
+			echo "deleting routers"
+			while route del default gw 0.0.0.0 dev $interface ; do
+				:
+			done
+
+			for i in $router ; do
+				route add default gw $i dev $interface
+			done
+		fi
+
+		echo -n > $RESOLV_CONF
+		[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
+		for i in $dns ; do
+			echo adding dns $i
+			echo nameserver $i >> $RESOLV_CONF
+		done
+		;;
+esac
+
+exit 0